Kopal® Mini Clamps
Measurements Available: Inch, Metric
KOPAL® Mini Clamps
These low profile cam action clamps and stops have a holding force of 880 lbs. (3900N.) and have fingers that push the workpiece down before clamping, even on castings that have negative draft!
Ground stops are mounted with special screws to ensure high precision locating.
CAM ACTION CLAMPS
|
 |
| The clamping element rotates around the eccentric insert that provides clamping in all directions. Clamping range: .047 (1.2mm). Made of spring steel. |
|
|
| Low Profile Clamp |
Raised Clamp |
Part
No. |
|
Clamping
Height |
Max.
Torque |
| 25210 |
CAD |
.100
(2.5mm) |
6.6 Ft.Lbs.
(8.95N.m.) |
|
Part
No. |
|
Clamping
Height |
Max.
Torque |
| 25215 |
CAD |
.300
(7.5mm) |
6.6 Ft.Lbs.
(8.95N.m.) |
|
|
Stops/Locators
|
|
| The single stop with only one rigid stop is used for pieces over 1.75″ (44.5mm) long. The double stop with 2 rigid stops are used for small size pieces. Both are made of spring steel. |
|
|
| Single Stop |
Double Stop |
| Part No. |
|
Jaw Height |
| 25105 |
CAD |
.100 (2.5mm) |
|
| Part No. |
|
Jaw Height |
| 25110 |
CAD |
.100 (2.5mm) |
|
|
Stops/Locators
|
|
|
|
| Raised Single Stop |
Raised Double Stop |
| Part No. |
|
Jaw Height |
| 25115 |
CAD |
.300 (7.5mm) |
|
| Part No. |
|
Jaw Height |
| 25120 |
CAD |
.300 (7.5mm) |
|
|
Stops/Locators
|
|
|
|
| Swivel Stop |
Raised Swivel Stop |
| Part No. |
|
Jaw Height |
| 25125 |
CAD |
.100 (2.5mm) |
|
| Part No. |
|
Jaw Height |
| 25130 |
CAD |
.300 (7.5mm) |
|
|
Have a technical question about our products? Ask our engineers!
View Our Catalog
Featured Product
